IP20 SMD5050 60led/m led strip

Features:

Available in lengths from 0.5meter to 5meters.
It can be cut every 10 centimeters.
It is easy to install with 3M sticky back tape on the backside.
Standard length is 5 meters per reel with 10-15cm electric cable wire.
PCB Material: Flexible copper,PCB color white, golden or black is available.
Life span: 50,000 hours.
Emitting color: Red, Green, Blue, Yellow, Warm white, Commercial white, Pure white.
Working Voltage:DC 12VDC(24VDC is available).
Working Temperature: -40 ~ 50 ℃.
Ambient Humidity: 0% ~ 95% relative humidity.

Parameter:

Dimensions and Schematic Diagram:

Package:

Installation: 

1、  Connection

R/Y/B/G/W Single color Non-waterproof LED strip Series : There are two wires for the product(Wire Pathway 22AWG; Wire Length 150MM),the Red one is connected to the positive section of the power supply while the Black one is for the cathode. See the diagram for better understanding.：

2. Installation

3M double glue on the back of the product. Rive off the protection paper then install the product to anywhere you need to.

3. Installation Notice：

1）Make sure the connection is correct according to the diagram.

2）Pay attention on the parameters limit on the above form. DO NOT run over the peak value.

3）Keep the surface of installation clear and level avoid breaking off.

4）Avoid the crook area is the just the position of LED and other components, in order to protect the product and extend the life span of the product

Application:
LED strip light can be applied for wide range of areas, indoor and outdoor. It can be sticked onto the wall and other objects, or twined round
pillar or other objects, decorating door, hall, corridor, cabinet, sculpture, plants, etc.